Midmark IQmark Digital ECG PDA Anleitung zur Fehlerbehebung PDF herunterladen (Seite 26)

IQmark Diagnostic Workstation Operation Manual

 NOTE: The temperature units setting only affects the temperature units of the

IQmark VSM Control Panel dialog box. It will not affect the temperature

units setting of the IQmark VSM.

If you plan to connect the IQmark VSM to your PC via a USB cable then select the USB

radio button. If you plan to connect to the IQmark VSM via a serial port cable then select

the Serial Port radio button and select the COM port from the combo box list.

If you do not know which COM port numbers correspond to the serial connectors or your

PC then you can use the auto-detection feature of the IQmark VSM Control Panel.

Perform the following steps to automatically to determine the COM port.

1. Connect the IQmark VSM to the serial port of your PC using the serial cable.

2. Turn on the power of the IQmark VSM and wait for it to complete its power-

on self-test sequence. “PASS” will appear in the front panel displays of the

IQmark VSM when it is ready.

3. Click on the Auto Detect button of the IQmark VSM Control Panel. A dialog

box similar to that shown in the following figure will appear.

4. If the software detects the IQmark VSM connected to a serial port or the USB

of your computer, it will indicate the detected connection. Click on the OK

button to accept the new setting.

Back

Go To Table Of Contents

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Keine Kommentare

Midmark IQmark Digital ECG PDA Anleitung zur Fehlerbehebung Seite 26