Midmark M11 Spezifikationen PDF herunterladen (Seite 29)

Error Code 5

(excessive pressure)

sterilizer overloaded with

gauze or linen packs.

reload the sterilizer in

accordance with Guidelines

for Loading Trays. If the

problem recurs, take the

unit out of service and

contact an authorized

service representative (see

Calling For Service later in

this manual).

Unit is out of calibration or

bellows is not functioning

properly.

allow sterilizer to cool

completely. Restart

sterilizer. If unit has errors

again, unplug unit and

contact an authorized

service representative (see

Calling For Service later in

this manual).

Error Code 6

(excessive temperature)

unit is out of calibration. allow sterilizer to cool

completely. Restart

sterilizer. If unit has errors

again, unplug unit and

contact an authorized

service representative (see

Calling For Service later in

this manual).

Error Code 7

(pressure low during

cycle)

leaking door gasket. allow sterilizer to cool; then

clean or replace door

gasket (see Remove and

Clean Door Gasket under

Quarterly maintenance in

this manual).

internal leak in unit

plumbing.

allow sterilizer to cool

completely. Restart

sterilizer. If unit has errors

again, unplug unit and

contact an authorized

service representative (see

Calling For Service later in

this manual).

Error Code 8

(door malfunction)

door did not open at end of

cycle.

make sure the tray rack is

pushed all the way back into

the chamber and is not

making contact with door.

Error Code Guide - (Continued)

Problem Possible Cause Solution

Operator

Maintenance

Return To Table Of Contents

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Midmark M11 Spezifikationen Seite 29

Kommentare zu diesen Handbüchern