Midmark M11 Spezifikationen PDF herunterladen (Seite 9)

program cycle is complete by sounding five audible “beeps”. The sterilizer

may be switched to standby at this time or restarted if additional sterilization

programs are desired.

Mechanical Features

The M11UltraClave™ sterilizers . . .

• have a tray rack which can hold two small and two large trays. The tray rack

can be removed for periodic cleaning of the chamber, tray plate, tray rack,

and filter.

• have an optional printer which provides a permanent record of actual expo-

sure times and temperatures.

• have a removable power supply cord (100 and 230 VAC units only).

• have a two gaskets in the door; a dam gasket and a door gasket which can

easily be replaced by operator in seconds.

Safety Features

The M11UltraClave™ sterilizers . . .

• have a

door stop

which prevents the door from opening fully if there is a

slight residual pressure in the chamber when the door handle is operated.

The door stop also retains the door in a partially open position during the

drying cycle.

• have a

door closed switch

which is used to signal the sterilizer that the

door is completely closed. This switch is activated just as the door becomes

fully closed. An audible signal will sound and the “Door Ajar” light will flash if

the door is not fully closed.

•have a

water low indicator

which signals the operator if there is insufficient

water to fill the chamber to the proper level. An audible signal will sound and

the “Water Low” light will flash if the reservoir needs to be refilled with water.

• have their

chamber temperature monitored

during a cycle to prevent an

overheat condition. If chamber temperature reaches or exceeds 146°C

(295°F), power to the sterilizer is cut off.

• have a

pressure relief valve

which opens to provide backup protection to

reduce chamber pressure in the event that the chamber steam pressure

exceeds the allowable limit. Released steam is directed out of the bottom of

the unit’s cabinet. An access cover is located on the top cover for relief valve

operational checks.

• have a

fault detection circuit

which monitors all functions of the sterilizer

during a cycle. If a fault occurs during a cycle, the sterilizer monitoring cir-

cuitry will stop the cycle, sound an audible signal, and light a flashing error

lamp.

Description

Installation

Return To Table Of Contents

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Midmark M11 Spezifikationen Seite 9

Kommentare zu diesen Handbüchern